Publicidad
The handle and foot lever are dismantled when the truck leaves the factory. The user can reas-
semble them before operation. The assembly method is as follows:
•
Handle installation method (as shown in the following diagram): Fix the handle (B1) to
the mounting hole of the truck body (A) using the bolt (B7), spring washer (B6) and flat
washer (B5). Then tighten the bolt (B7) using a wrench.
•
Foot lever mounting: Insert the foot lever (B31) into the hole. Then insert the screw (B29),
the plain washer (B27) and the spring washer (B28). Tighten the screw (B29) using a
wrench.
Assembly method
Publicidad
