Publicidad
Idiomas disponibles
Idiomas disponibles
Conducting a Manual Test
1.
Position the sampling cone no less than 4" from
the subject's mouth.
2.
Instruct the subject to blow steadily towards
the cone.
3.
Once the subject begins blowing, press the
Execute button to trigger the test.
4.
Read results.
5.
Results will stay on the screen for 30 seconds or
until you press the Function button.
Conducting an Open Container Test
1.
Position the sampling cone no less than 4" from
the container or sample.
Press the Execute button to trigger the test.
2.
3.
Read results.
4.
Results will stay on the screen for 30 seconds or
until you press the Function button.
5.
For best results, slightly agitate the sample prior
to trigger the test.
Conducting an Ambient Air Test
1.
In any of the three modes, wave the unit in the
air and press the Execute button to trigger the
test.
2.
Read results.
3.
Results will stay on the screen for 30 seconds or
until you press the Function button.
6
User Prompts
User Prompts
POS/NEG Test Mode: NEG results will
register as a Zero, POS results will be
anything >0.
Negative results when in POS/NEG Test
Mode.
Positive result when in POS/NEG Test
Mode.
Levels Test Mode: Results will register in
one of three different levels depending on
the subjects alcohol content.
Zero: <.010% BAC (<.04 mg/l)
Low: .011 - .020% BAC (.05 - .09 mg/l)
High: >.021% BAC (>.100 mg/l)
Display shows results as <.010% BAC when
in Levels Test Mode.
Display shows results as .011 - .020% BAC
when in Levels Test Mode.
Display shows results as >.021% BAC when
in Levels Test Mode.
Open Container Test Mode: NEG results
will register as a Zero, POS results will be
anyting >0.
Negative results when in Open Container
Test Mode.
Positive results when in Open Container
Test Mode.
The hourglass appears when the FC5 is in
wait mode. This can occur when the FC5 is
recovering from a POS test.
Cause & Course of Action
7
Publicidad
