Adler europe AD1150 Manual De Uso página 4

Select the Snooze Length (1-60 minutes) using the " Up , Down" buttons (5,6). Confirm by pressing the
"Alarm" button once.
5. Select Alarm activation days with the " Up , Down" buttons (5,6).
1-5 - Monday - Friday.
1-6 - Monday - Saturday.
1-7 - Monday - Sunday.
Confirm by pressing the "Alarm" button once.
6. When the alarm is activated press the " SNZ - Light " button, the alarm will snooze for the length of time set
in point 4.
7. To turn off the alarm for the day. When the alarm is activated, press the "Alarm" button. The alarm clock will
not go off on that day.
Enabling the alarm function:
1. To turn on the alarm function, press the "Alarm" button one at a time. The letters AL will appear on the
display.
2. To Deactivate the alarm function, press the "Alarm" button one at a time. The letters AL will disappear from
the display.
Automatic switching between information on the display:
1. Use the Mode button (2) to switch the display to show temperature.
2. Press and hold the Mode button (2) until the device beeps.
3. The device will enter the automatic transition mode between Time, Date and Temperature.
4. To disable this function, repeat steps 1-3.
Change the brightness of the display
UP button (5) once . There are 2 brightness options: 1. Bright, 2. Muted
Turn on night mode. (18:00 - 6:00)
This function reduces the display brightness from 18:00 - 6:00. During this time, the display will be in the
setting: 2. muffled. From 6:00 a.m. to 6:00 p.m. the display will be in the setting: 1. Bright:
1. Press and release the Mode button (2) until the display shows OFF.
2. Press the UP button (5) one at a time. ON will appear in the display. The display dims automatically.
3. To disable this function, follow steps 1,2 and change the setting from ON to OFF.
Technical data:
Battery type: 3x AAA (Lr04) We suggest using rechargeable batteries.
USB power supply: 5V 1A
Temperature range: 0-50 ℃
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags (PE) into the plastic container
Worn device should be returned to the appropriate point storage because it is dangerous in the device
ingredients may pose a threat to the environment. The electrical device should be handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to the point stored separately.
4