Receiving Calls - Sony Caller ID IT-M602 Manual De Instrucciones

Receiving calls

(LINE 1) (LINE 2) (SPEAKERPHONE)
Tip
The ringer tone on line 1 is lower and line 2 is higher.
(CALL WAITING/FLASH)
(HOLD)
1
When you hear the phone ring;
• Pick up the handset from the
phone (or press
(SPEAKERPHONE)).
o r
• Press (LINE 1) or (LINE 2)
whichever button is flashing.
The SPEAKERPHONE lamp
lights up and you can talk
through the speakerphone.
To talk through the handset,
pick up it from the cradle.
The connected LINE 1 or LINE 2
button lights up and
"=== TALK ===" appears on
the display.
2
When you're done talking,
replace the handset in the cradle
(or press (SPEAKERPHONE)).
The LINE 1 or LINE 2 button
goes off.
When calls come in on line 1 and
line 2 at the same time
When you pick up the handset from
the phone or press
(SPEAKERPHONE), line 1 is
connected and the LINE 2 button
flashes.
To put a call on hold or disconnect
the line, see "Receiving a call while
talking" on page 18.
continued
17 EN
Basics