EQUATION PF02D-G Instrucciones De Montaje página 37

If the supply cord is damaged, it must be replaced by the manufacturer, its service
●
agent or similarly quali ed persons in order to avoid a hazard.
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal
●
cutout, this appliance must not be supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly switched on and o by the utility.
WARNING: In order to avoid overheating, do not cover the heater.
●
The heater must not be located immediately below a socket-outlet.
●
Do not use this heater in the immediate surroundings of a bath, a shower or a
●
swimming pool.
do not use this heater if it has been dropped;
●
do not use if there are visible signs of damage to the heater;
●
use this heater on a horizontal and stable surface, or x it to the wall, as applicable.
●
WARNING: Do not use this heater in small rooms when they are occupied by persons
●
not capable of leaving the room on their own, unless constant supervision is provided.
WARNING: To reduce the risk of re, keep textiles, curtains, or any other ammable
●
material a minimum distance of 1 m from the air outlet.
3. INSTALLATION
Your appliance shall be used as portable appliance only (thanks to respect all the safety
warnings given below)
Put the heater on a at, dry and clean surface.
Let a minimum distance of 1m between any side of your appliance and any obstacle
(furniture or walls, for example) to allow a good circulation of the air ow. Always direct
the air ow in order to optimize the heating of the room. Avoid the corners, small
volumes, wood oors, ceiling, etc...
4. HOW TO USE
Plug the appliance to a 220-240V
To start the heater, put the switch on the position
position (High power).
Put the switch on the fan position to start this function.
Set the temperature with the switches - / +.
To stop the heater, put the switch on the position 0.
Unplug the product when it's not in use.
50-60Hz socket.
~
(Low power) or on the
FR
ES
PT
IT
EL
PL
UA
RO
EN
37