Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Product Safety Information
Intended Use:
A Cordless Angle Grinder is a battery-powered, hand-held power tool driving a rotating shaft (shank, arbor or mandrel) on which an accessory is
mounted. A grinder can be used for material removal, cutting, or surface preparation.
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
• Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper disposal may endanger the environment or
cause personal injury.
• Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of any other batteries may create a risk of fire,
personal injury or property damage.
For additional information, refer to Cordless Angle Grinder Safety Manual Form TL-G5351-SIM, Battery Charger Safety Information
Manual Form 10567832 and Battery Safety Information Manual Form 10567840.
Manuals can be downloaded from ingersollrand.com
Ingersoll Rand has updated their battery labeling from fully charged voltage to nominal voltage to follow current guidelines. The new labeling
will reflect the nominal voltage of the batteries adjusting from 12V to 10.8V, from 20V to 18V, and from 40V to 36V.
Nominal voltage is the average voltage presented while the battery is in use. Note the battery performance has not be impacted due to this
guideline adherence and the batteries maintain compatibility within their respective voltage platforms, for example an IQV® 20 series tool
corresponds with an IQV® 20 series battery.
Recommended Accessories
Accessories for power tools are defined as items that are installed in or on the tool and become the working interface between the tool and the
workpiece. They are typically consumable and should be purchased separately from the tool. Accessories should be matched with the
appropriate job being done. Failure to follow the warnings in this instruction manual could result in death or serious injury.
The accessories that may be used with Cordless Angle Grinder are grinding wheels and cut-off wheels. Tool requirements and limitations of the
accessory use, type, speed and size are given below.
Functional Description
1
7
11
12
Product Specifications
Voltage
Models
G5351
G5351M
EN-1
2
4
5
6
8
Battery Model
(V, DC)
20
BL2022, BL2023
20
BL2022, BL2023
WARNING
3
9
10
Output
5/8"-11"
M14
Item
Part Description
1
Spindle Lock
2
Handle
3
Dust Cover
4
Switch Lock-off
5
Paddle Switch
6
Auxiliary Handle
7
Guard Latch
8
Type B Guard
9
Type A Guard
10
Spanner Wrench
11
Backing Flange
12
Flange Nut
Maximum
Power
Free Speed
(HP)
(rpm)
8,000
1
8,000
1
TL-G5351-PIM_ed3
Publicidad
