Siemens PA0840M Instrucciones De Uso página 40

Press the "Ti m e r" key
time. If you do not press this key, the time is
automatically memorised when a period of 10
seconds has passed without pressing any key.
The screen returns to the main menu.
10 sec/
Programming the timer
The appliance needs to be turned on with the
clock set in order to programme the start /
stop times.
Press the "Timer" key
the timer menu. Press the "+" key to
programme the different functions available on
your appliance. These are:
• "Off" : appliance not programmed.
• "Start" : programming the appliance
start time.
• "Start/ Stop"
appliance start and stop time.
• "Stop" : programming the appliance .
Programming the appliance start time
Press the "Ti m e r" key
cursor on the timer menu. The last function
programmed appears by default
Instructions for Use
, to memorise the
, to navigate through
: programming the
, to position the
Use the "+" and "–" keys to select the
"Start" function
Use the "down" key (see "up" and "down"
keys) to lower the cursor to the start time
menu. Then use the "+" and "–" keys to
modify the programmed time until the
desired time is reached.
The time changes 15 minutes at a time.
Press the "Timer" key
seconds without touching any keys to
memorise the set start time.
The set time is displayed on the screen
together with the relevant symbol (the
"Start" symbol
10 sec/
40
, (see "+" and "–" keys).
, or wait for 10
) and the set functions.