Página 2
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
Página 3
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Headboard Footboard Side Panel Side Panel Side Rail Check Box to identify the parts and ensure that T966510 T966520 T966530...
Página 4
Hardware Pack Hardware Pack #: T4107119-00 1/4" X 3/4" X 40 1/4" X 1 3/8" 1/4" X 1 9/16" X 28 1/4" X 1 3/4" 5/16" X 2 1/4" 1/4" Please do not completely tighten all the hardware, until the entire assembly is complete, unless Wrench otherwise indicated in the step-by-step instructions.
Página 5
Step 1 The slat holes on F should be facing upward. Attach F and H to C and D with Repeat the same step for remaining parts C, D, F and H. X 16...
Página 6
Step 2 Attach G X 2 to previous subassembly C The slat holes on G should and D with be facing upward. Repeat the same step for remaining parts G and the other subassembly C and D. X 12...
Página 7
Step 3 Attach S to D and T to C with Repeat the same step for the other subassembly C and D. X 12...
Página 8
Step 4 Screw into A and into B, leave half of the thread exposed . Do not completely tighten the BOLTS, leave half of thread exposed.
Página 9
Step 5 Hang C and D on A and B as illustrated, don't completely tighten the bolts until STEP 9 is completed.
Página 10
Step 6 Attach N to Z with Repeat this step for all remaining legs Z.
Página 11
Step 7 7.1 Attach N X 4 to A, B, C and D with 7.2 Attach L X 2 to H X 2 with X 16...
Página 12
Step 8 Insert I X 2 and J into M X 2, then fix them with Slat holes on part I and J should be facing upward.
Página 13
Step 9 Attach subassembly from previous STEP to A and B with , then properly tighten all the bolts including those from STEP 5.
Página 15
Step 11 11.1 Insert O into X ; 11.2 Press X into F and G, repeat the same procedure for the opposite side with a new O and X . 11.3 Insert ends of both slats O into Y , then press Y into I and J as illustrated.
Página 16
Weight Limit: 250 Lb / 113 Kg Helpful Hints Helpful Hints ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ●...
Página 17
4317119WE NO LO REGRESE A LA TIENDA ! Si le faltan piezas o las que se incluyen están dañadas, con Cama tapizada mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Individual Visite www.dhpfurniture.com/spa/replacement-parts Lino Beige o llame gratis al 1-800-267-1739...
Página 18
Partes Instrucciones Paso 1 Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts Una la parte F & H con C & D con Repita el paso para las otras partes C, D, F & H. Todo se incluye en 1 caja grande! Paso 2 Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para Una la parte G X 2 con C &...
Página 19
Límites de peso: 250 Lb / 113 Kg Consejos útiles ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de mudanza.