Descargar Imprimir esta página

DeWalt DXV10P Manual De Instrucciones página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

ACCESSORY BAG HOLDER BRACKET ASSEMBLY
Attach 2 accessory bag holder brackets to tank with 4
self-tapping screws provided.
ACCESSORY BAG HOLDER ASSEMBLY
Place the accessory bag holder into the hole of bracket.
(See illustration).
WARNING!
To reduce the risk of fire or explosion, do not operate this vac in
areas with flammable gases, vapors or explosive dust in the air.
Flammable gases or vapors include but are not limited to: lighter
fluid, solvent-type cleaners, oil-based paints, gasoline, alcohol or
aerosol sprays. Explosive dusts include but are not limited to:
coal, magnesium, aluminum, and grain or gun powder. Do not
vacuum explosive dust, flammable or combustible liquids or hot
ashes. Do not use this vac as a sprayer for any flammable or
combustible liquid. To reduce the risk of health hazards from
vapors or dusts, do not vacuum toxic materials.
WARNING!
The operation of any utility vac can result in foreign objects being
blown into the eyes, which can result in severe eye injury.
Always wear safety goggles complying with ANSI Z87.1 (or in
Canada, CSA Z94.3) before starting operation.
CAUTION:
To reduce risk of hearing loss, wear ear protectors when using
the vac for extended hours or when using it in a noisy area.
The unit is ready for dry vacuuming or blowing. After you plug the
power cord into the wall receptacle, turn the unit "ON" by pushing
the switch position with 1 embossing straps is the "ON" position.
ON
7
OFF
ON
OFF

Publicidad

loading