English
EN
3. Select the name "Woxter DL-410 BT" from the list of bluetooth
devices found.
4. Your device will indicate when the connection between the
two has been made and an LED will light blue emitting a con-
nection tone finished.
5. Disconnect the BT function or pause playback of your BT
device, it will switch the mode to AUXILIARY input automatically.
Connections
1. Connect the left speaker to the right speaker through the
cable provided for interconnection. The right speaker is also
known as the main speaker since it includes the amplifier.
2. Place each of the speakers on the correct sides (left, right) of
the listening position.
3. Connect the playback device on the back of the main
speaker, on the 3.5mm plug with the supplied cable.
4. The main speaker (the right speaker) should be placed near
a power source and near the playback device (MP3, MP4, CD,
DVD, etc ...).
5. Finally, connect the power cable from the back of the main
speaker (right) to the network. Check that the current matches
the one written on the rear panel.
Functioning
1. Check that the volume is at the lowest possible level. The
volume buttons are located on the side of the right speaker.
2. Turn on the system by setting the switch to ON (located on
the back of the main speaker). The status indicator will light.
3. Start playback of the device and a song.
4. Adjust the volume to achieve the desired level.
5. Then adjust the treble and bass levels located on the side
panel to achieve the desired sound effect.
14
>> woxter.es