Schumacher REDFUEL SL3 Serie Manual Del Usuario página 7

5. RECHARGING THE FUEL PACK
SL3 series
Recharging will take up to 4 hours.
1. Plug the provided charging cable's Micro USB end
into the Fuel Pack's Micro USB "IN" port, and then
plug the USB end into your computer or laptop.
2. The LED indicator will turn on, RED.
3. When charging is complete, the LED will turn BLUE
and stay on until the unit is disconnected.
SL4 series
Recharging will take up to 6 hours.
1. Option 1: Plug the provided (detached) charging
cable's Micro USB end into the Fuel Pack's Micro
USB "Input" port, and then plug the USB end into
your computer or laptop.
Option 2 (using attached charging cable):
Plug the attached cable's USB end into your
computer or laptop.
2. Blue LEDs blink, indicating the level of charge.
3. When charging is complete, all 4 LEDs will turn
solid and stay on until the unit is disconnected.
SL5 series
Recharging will take up to 15 hours.
1. Plug the provided charging cable's Micro USB end
into the Fuel Pack's Micro USB "IN" port, and plug
the USB end into your computer or laptop.
2. When connected, the LCD display will turn on (with
the blue backlight on for 10 seconds), showing % of
charge and blinking IN.
3. When charging is complete, the LCD will show 100%
charged, and stay on until the unit is disconnected.
To check the capacity (%) available on the Fuel Pack,
shake the Fuel Pack once. The LCD display will turn
on and show the % of charge.
• 7 •