Kinderkraft TOVE Manual De Uso página 11

To avoid falls and collisions causing injury to the user or others, parents/guardians should
●
draw children's attention to the safety precautions to be taken. Before using the product, it
is important to explain to children how to use it safely.
The person using the product must always wear shoes.
●
Assembly must always be carried out by an adult. Before each use, check that the item is not
●
damaged or worn and that all assembly and fastening parts are in good condition. Ensure
that the bolts and nuts retain their auto-locking properties. Check that the assembly is
complete and in good condition. If you notice that some parts are missing or damaged, do
not use the product, but contact your retailer. Small items must be kept out of the reach of
children.
Be careful when riding bicycles, you should know how to ride to avoid falls or collisions that
●
could cause injury to the user or a third person.
The safest areas for the persons using the bicycle are those with little or no vehicular traffic,
●
such as private areas, playgrounds, schoolyards, and school playgrounds.
Maximum user weight − 25 kg
●
Keep the packaging or dispose of it in accordance with local regulations.
●
For the safety of children, do not leave parts of the packaging freely accessible (plastic bags,
●
cardboard boxes, etc.). Risk of suffocation!
I Bike components
1. Frame with rear wheel
2. Front wheel
3. Handlebar
II Assembly of the bike
Insert the front wheel (2) into the main frame (1) as shown on figure A. Then turn the knob on
the handlebar (3) clockwise to OFF (Fig. B) and insert it into the main frame (1), until the "click"
sound. Turn the knob on the handlebar (3) counterclockwise to ON. After installation of
handlebar and front wheel, insert the seat (4) by sliding it into the opening in the frame (Fig. D),
then tighten screws with a wrench using allen keys (5). Please note that the bracket's minimum
insertion mark shall be hidden in the frame (the saddle shall be in such a way that the vertical
lines on the bracket are inside the tube) (Fig. E).
CAUTION: Before each use, check that all connecting parts (bolts, nuts) are in good fit. Keep
small parts out of reach of children.
III Maintenance and cleaning, storage
Clean the product with a damp cloth or sponge. Protect from dust, moisture, water, high and
very low temperatures, falls, etc. It is better to add solid grease regularly to transmission parts
such as wheel axles, handlebar shafts etc. to extend product life.
4. Saddle
5. Allen key x 2
11