RTS 50 US Gallon Dual Spigot Manual De Instrucciones página 7

7
Insert the threaded end of the hose barb into the 1" drilled hole.
Inside the rain collector
Reach inside the rain collector through the
screen opening on the top and place the
O-Ring over the hose barb, flush to the inside
of the rain collector. Then screw the plastic
lock nut onto the hose barb until tight.
Follow step 4 to insert your rain collector screen.
Your new 25 US Gallon Rainwater Shed Collector is now assembled. Place the rain collector on a flat surface.
Ensure the downspout is lined up for the water to flow into the screen on the top of your rain collector.
page 7 of 8