N'oveen IKN910 LED Manual De Instrucciones página 7

IKN910/911 DESCRIPTION:
1. Protective mesh
2. High voltage grids
3. LED
4. LED
5. Upper slot
6. Accessories
7. Transformer
8. Top cover
9. LED driver
10. Accessories
11. Switch
12. Power cable
13. Protective mesh
14. Bottom lid
15. Collection tray
IKN920/921 DESCRIPTION:
1. Outer cover
2. HV grids supporter
3. HV transformer
4. LED panel
5. LED drive
6. Power cord
7. Collection tray
8. HV grids
CLEANING AND MAINTENANCE:
Before emptying the tray, remove the plug from the wall socket. If there are insects present
on the mesh, they must be removed with a soft brush. Due to safety during cleaning do not
use any liquids, even water! To empty the tray, remove it, the tray is located at the bottom of
the device.
The device's area of operation depends on different conditions and the room in which it is
used. It must not be partitioned by walls or other barrier elements that reduce the operating
range of the device. Work time of the fluorescent lamps: up to 20,000 hours.
7