Wiesenfield WIE-CCD-100 Manual De Instrucciones página 39

Return the batteries to a unit responsible for their disposal.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
ERROR CODES:
Error Screen
code
Error 1 Panel out!
Error 2 Open Blocked
Close Blocked
Reason
1. Front panel
2. The position
sensor does not
detect the
magnet on the
door
3. The upper
magnet has fallen
off
4. Internal
position sensor
error
5. PCB is defective
Door blocked
while opening
Door blocked
while closing
Solution
Check if the front panel is installed
correctly. If not, install the front panel
and screw the 4 knobs on the sides.
Pull out the front panel to lower the
door and make sure that there are no
objects at the bottom of the door that
obstruct its movement. Then reinstall
the panel and screw it on.
Install the magnet or contact the
manufacturer if a new magnet is
needed.
If there is still an error after "1, 2, 3",
send the unit for repairs.
If there is still an error after "1, 2, 3",
send the unit for repairs.
1. Check if the gear is not blocked.
2. Check if there are no obstacles in
the guides.
3. If there are no obstructions, add
some lubricant to the guides.
After solving the problem, press the
"MENU" button to clear the error.
1. Check if there are no obstructions at
the bottom of the door.
2. Check if there are no obstacles in
the guides.