Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
4.
Demolishing operation (Hammering only)
Bull point (Round type) (SDS-plus shank)
Code No. 303046
Bull point (Square type) (SDS-plus shank)
Code No. 316656
5.
Groove digging and edging (Hammering only)
Cold chisel (SDS-plus shank)
Code No. 316657
Cutter (SDS-plus shank)
Code No. 316658
6.
Grooving (Hammering only)
Grooving chisel (SDS-plus shank)
Code No. 316659
7.
Bolt placing operation with Chemical Anchor.
(Rotation + Hammering)
Standard socket
(SDS-plus shank)
on the market
1/2" (12.7 mm)
Chemical Anchor Adapter
3/4" (19 mm)
Chemical Anchor Adapter
8.
Drilling holes and driving screws (Rotation only)
Drill chuck, chuck adaptor and chuck wrench
Special screw
Drill chuck (13VLRB–D)
Code No. 981122
(includes chuck wrench)
Code No. 321814
16
000Book_DH26PC_NA_metabo.indb 16
000Book_DH26PC_NA_metabo.indb 16
9.
Drill chuck (13VLD–D)
(includes chuck wrench)
Code No. 321813
10. Driving Screws (Rotation only)
Phillips Driver Bit
Bit No.
(Code No.303044)
No.2
No.3
(Code No. 303045)
11. Dust cup, Dust collector (B)
12. Rotary hammer grease
NOTE
Specifi cations are subject to change without any
obligation on the part of the metabo HPT.
Chuck adaptor G
(SDS-plus shank)
Chuck wrench
Code No. 303623
Drilling holes (Rotation only)
Chuck adaptor (D)
(SDS-plus shank)
Code No. 303624
Chuck wrench
1/2" (13 mm) drill chuck ass'y (includes chuck wrench)
and chuck (for drilling into steel or wood).
Chuck adaptor (D)
Bit No.
(SDS-plus shank)
Code No. 303624
Screw Size
Length
1/8" – 3/16"
31/32"
(3 – 5 mm)
(25 mm)
1/4" – 5/16"
31/32"
(6 – 8 mm)
(25 mm)
Dust cup
Dust collector (B)
Code No. 971787
Code No. 306885
1.1 lbs (500 g) (in a plastic case) Code No. 335781
0.13 lbs (60 g) (in a tube) Code No. 335782
Code No.
971511Z
971512Z
2018/03/22 9:55:32
2018/03/22 9:55:32
Publicidad
Tabla de contenido
