Genie 206 S Manual De Instrucciones página 9

10. Please do not leave the document shredder unattended e.g. in the event children
or pets are nearby.
11. The document shredder is only suitable for shredding paper, please do not insert any
other materials, the paper must be dry and clean.
12. Never open the casing. In the event of problems with the device, please contact our
hotline.
13. The device may not be operated with a damaged power cord.
14. For indoor use only.
15. Please do not spray any flammable gas or oil
16. Unplug this equipment when not in use for an extended period of time.
Remark: For optimum results and to protect the machine, we suggest the user to operate it
for 2 minutes and then rest 60 minutes.
WARNING: Hazardous moving part is in this equipment, keep body parts away from
moving parts.
WARNING: Sharp edges in the cutting unit. Keep fingers and other body parts away
from the cutting unit
ELECTRICAL SAFETY GUIDELINES

Please disconnect the mains plug before not using the unit for a prolonged period of time!

In the event of damage to the mains cord, the mains plug or the device itself, please
cease operating the device (risk of injury)!

Please do not attempt to repair the unit yourself!

Please do not overload the capacity of the socket!

The mains connection of the device must be freely accessible!

Do not modify the mains cord as it complies with the prescribed grid voltage!
Delivery:
Shredder GENIE 206S,
Manual
Setting up the document shredder:
1. The shredder attachment is equipped with a pull-out arm which can be used to fit the
attachment on various sized waste bins.
2. When fitting it, pay attention that the attachment fits securely and that your
fingers do not get jammed between the top edge of the waste bin and shredder.
Risk of injury!
Note: Thanks to the removable arm, you may also mount the document shredder on
other round and rectangular waste baskets. The arm is located on the left side of the
document shredder and is suitable for waste baskets with a width of 270 mm to
340 mm.
3. Connect the main plug to a standard 220-240 volt AC socket.
onto this shredder, it may cause fire.
- 9 -