Publicidad
Idiomas disponibles
Idiomas disponibles
This product earned the ENERGY STAR label by meeting strict energy efficiency guidelines set by the U.S.
EPA. Room air cleaners have demonstrated the potential for improving air quality and providing health
benefits. EPA does not endorse manufacturer claims regarding the degree to which a specific product will
produce healthier indoor air. The energy efficiency of this ENERGY STAR certified model is measured based
on a ratio between the model's CADR for Smoke and the electrical energy it consumes, or CADR/Watt.
TROUBLESHOOTING
PROBLEM
Unit will not operate
Reduced airflow
Reduced odor removal
Excessive noise
Power button flashes red
after filter replacement
POSSIBLE CAUSE
• Unit is not plugged in
• Power button not pressed
• No power to unit
• The grille may be blocked
• Prefilter needs to be vacuumed
• The HEPA-type filter needs to
be replaced
• The HEPA-type filter needs to
be replaced
• The unit is not level
• The replace filter indicator
needs to be reset
11
SOLUTION
• Plug unit in
• Press the power button to turn the
power on
• Check circuits, fuses, try a
different outlet
• Check to make sure nothing is
blocking the grille and air outlet
• Vacuum the prefilter with the
brush attachment of your vacuum
cleaner
• Replace the HEPA-type filter
• Replace the HEPA-type filter
• Place the unit on a flat, level
surface
• Press and hold the power button
for 3 seconds until the flashing
power light turns off
Publicidad
