Descargar Imprimir esta página

Imetec Bellissima S2501 Instrucciones De Uso página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
Clean the surface of the heating plates (1/2) and the handle with
a soft, damp cloth.
EN
Problem
The plate doesn't
warm up
The case inside the package can be used to store the straightener
when not in use.
If you do not use the appliance for a long time:
Clean the appliance as described in the "Cleaning" chapter.
Store the appliance in a dry and clean place.
The appliance can be hung up using the hanger loop (5).
The packaging of the appliance is made of recyclable materials.
Dispose of it in accordance with the environmental protection
regulations.
Pursuant to Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE), the crossed bin symbol on the
appliance or its packaging indicates that the appliance must
be disposed of separately from other waste at the end of its
useful life.
TROUBLESHOOTING
The supply cable is
not connected to the
mains.
The on/off button
was not switched on
correctly.
STORAGE
WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
WARNING! DO NOT wrap the supply
cord around the appliance.
WARNING! Store the appliance so that
no object may accidentally go into
and damage it.
DISPOSAL
Cause
16
Solution
Connect the cable to the
power supply.
Slide the O I switch
towards the "I" symbol.
If the problem persists,
contact an authorised
service centre.

Publicidad

loading