Mo-vis Multi Swing 2G Manual Del Usuario página 14

NOTE:
The jack connections of the input and output are configurable via the mo-vis
Configurator Software. Please see the Installation Manual for more information.
The LED shows the status of the device:
STATUS
Operational Green
Powersave Green
Warning Orange
Error Red
NOTE:
A warning will block certain functionalities of the Multi Swing, while an error
will block the arm and the outputs completely.
NOTE: You will not notice that you are in powersave mode. It just means that after 1
minute, the motor will draw less current to save the battery of the power chair.
Connection with the power wheelchair
A power wheelchair usually consists of minimum two modules:
• Power module: connected to the batteries and the electric motor of the wheelchair.
• The joystick module: standard joystick on the power wheelchair that can be operated
by the user to control the wheelchair.
Both modules are connected to each other and can send each other signals.
The Multi Swing 2G has an XLR plug, which can be connected to either the power module
or the joystick of the wheelchair.
Safety features
The Multi Swing 2G holds some safety features:
• The Multi Swing 2G has a configurable output which can inhibit driving of the
wheelchair when the joystick is not in the end position (see Installation Manual).
• The arm can always be pulled away manually if needed, without damaging the
mechanics.
CAUTION:
Multi Swing 2G User manual
COLOR TIMING
Continuously on
Heartbeat
Flash
Flash
It is advised to only do this in case of emergency and not regularly.
COUNT
/
/
See Installation
manual
See Installation
manual
DESCRIPTION
Normal operation
Powersave
Part of the func-
tionality is dis-
abled
Something went
wrong
13