Publicidad
Idiomas disponibles
Idiomas disponibles
•
While straightening, be careful not to near the plates too much to
the sensitive parts of the face, ears, neck or head.
•
Leave the plates to cool down completely when finished, before
putting the appliance away.
WARNING! This appliance is not to be
used if it has been dropped or if there
are visible signs of damage.
WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! DO NOT spray hairspray
while the appliance is switched on.
There is a risk of fire.
PREPARING YOUR HAIR
•
Wash hair as normal and comb to remove knots.
•
Dry your hair and brush from the roots to the ends.
INSTRUCTIONS FOR USE
•
Connect the power cord (6) to the mains.
•
Place the switch (2) in the ON position. The operation LED (5)
will light up.
•
Rotate the temperature adjustment wheel (4) to set the desired
temperature between 140 °C and 230 °C, depending on the type
of hair and the desired effect; the temperature can be adjusted
at any time by rotating the wheel (4) clockwise (to increase the
temperature) or anti-clockwise (to decrease the temperature).
•
The operation LED (5) flashes until the plates reach the set
temperature.
•
Once the temperature is reached, the operation LED (5) remains
on.
•
Take a thin lock of hair, the same width as the plate and place it
between the two plates.
•
Keep the lock of hair taut with one hand and, with the other hand
slide, the closed plate from the roots down to the ends.
•
Once you have finished styling your hair, turn the appliance off.
Place the switch (2) in the OFF position and unplug the hair
straightener from the power socket.
NOTE: steam may appear while straightening; this is
excess humidity in the hair that evaporates.
USE
13
EN
Publicidad
