Publicidad
Idiomas disponibles
Idiomas disponibles
34 | English
Fully automatic spindle locking (Auto-lock)
The spindle is locked when the On/Off switch 7 is not pressed.
This enables screws to be screwed in, even when the battery is empty and al-
lows for the machine to be used as a screwdriver.
When the spindle is locked, do not press the On/Off switch 7 for more
than 15 seconds. Otherwise the power tool can be damaged.
Working Advice
Apply the power tool to the screw only when it is switched off. Rotat-
ing tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine (e. g., maintenance, tool change,
etc.) as well as during transport and storage, set the rotational direc-
tion switch to the centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
For safe and proper working, always keep the machine and ventila-
tion slots clean.
When the battery is no longer operative, please refer to an authorised after-
sales service agent for Bosch power tools.
If the replacement of the supply cord is necessary, this has to be done by
Bosch or an authorized Bosch service agent in order to avoid a safety hazard.
If the machine should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an after-sales service centre for
Bosch power tools.
In all correspondence and spare parts order, please always include the
10-digit article number given on the type plate of the machine.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance
and repair of your product as well as spare parts. Exploded views and infor-
mation on spare parts can also be found under:
1 609 92A 43H | (26.9.17)
Bosch Power Tools
Publicidad
