Vision Fitness T80 Manual Del Propietário página 27

ASSEMBLY STEP 5
FLAT
WASHER (H)
8.4 mm
Qty: 4
BOLT (I)
FLAT WASHERS (H)
CONSOLE REAR COVER
PRE-INSTALLED
SCREWS
CONSOLE CABLES
FLAT WASHERS (H)
SPRING WASHER (J)
NUT (K)
28
HARDWARE FOR STEP 5:
SPRING
BOLT (I)
WASHER (J)
45 mm
8.2 mm
Qty: 2
Qty: 2
CONSOLE
CONSOLE BASE
Open HARDWARE FOR STEP 5.
A
Remove 2 PRE-INSTALLED SCREWS to
B
NUT (K) remove CONSOLE REAR COVER from the
Qty: 2
CONSOLE.
Attach the CONSOLE to the CONSOLE BASE
C
using 2 BOLTS (I) and 2 FLAT WASHERS (H)
from above and 2 FLAT WASHERS (H)
2 SPRING WASHERS (J) and 2 NUTS (K)
from below.
NOTE: Be careful not to pinch the console
cables while attaching the console.
Connect the CONSOLE CABLES to the
D
CONSOLE.
Re-attach the CONSOLE REAR COVER to
E
the CONSOLE using 2 PRE-INSTALLED
SCREWS.