Peaq PTV551203 Manual De Usuario página 33

Turning on/off subtitles
Press MENU on the remote control and select
1.
Options > Subtitle.
Press OK/► to enter. (Refer to Figure 5.)
2.
Select the Subtitle option, and press ◄/► to
3.
select On/Off to turn on/off subtitles.
Enabling subtitle languages on digital TV channels
1. Press MENU on the remote control and select
Options > Subtitle > Digital subtitle language.
2. Press ◄/► to select a subtitle language as your
preferred language.
3. Press ▲/▼ to select Digital subtitle language
2nd.
4. Press ◄/► to select a secondary subtitle
language.
5. Press EXIT to close the menu.
Shortcut operation: Press SUBTITLE on the remote
control to directly select a subtitle language available
for the selected digital TV programme.
Selecting a subtitle type on digital TV channels
1. Press MENU on the remote control and select
Options > Subtitle > Subtitle type.
2. Press ◄/► to select a subtitle type. You can
select Hearing impaired to display the hearing
impaired subtitles with your selected language.
Selecting decoding page language in Teletext
Press MENU on the remote control and select Options
> Teletext > Decoding page language. Select a
proper type of language in which Teletext will display.
Digital Teletext language
For digital TV channels, your TV could change to a
service with multiple initial Teletext pages in different
languages. This function allows you to select an
available language as primary language, which
relates to different initial Teletext pages.
Press MENU on the remote control and select
Options > Teletext > Digital teletext language.
Press ◄/► to select.
SPDIF type
Connect to an audio device through the SPDIF
output. Press MENU on the remote control and
select Options > SPDIF type. Select a proper sound
type from the list for digital programmes.
- If the current programme outputs sound in Dolby
D format, then either PCM or Dolby D can be
selected.
- If the current programme does not output sound
in Dolby D format, only PCM can be selected.
Otherwise no sound will be output.
- Select Off to turn off the audio output from the
audio device connected to the SPDIF output.
Note: The options you may choose depend on the
programme you are watching. If you select
PCM and the sound is ahead of the picture,
you can select SPDIF delay from the Options
menu and press ◄/► to adjust the delay time
to synchronize the sound with the picture.
T-Link
Use this function to search for CEC devices
connected to the HDMI sockets in your TV and
enable one-touch play and one-touch standby
between CEC devices.
Enabling or disabling T-Link
1. Press MENU on the remote control, then select
Options > T-Link.
2. Press ◄/► to select On or Off.
Using one-touch play
One-touch play enables you to press the play button
on, for example, your DVD remote control. This starts
playback on your DVD device and automatically
switches your TV to the correct source, displaying
DVD content.
Using system standby
System standby enables you to press the
on, for example, your TV remote control. This
switches your TV and all connected HDMI devices to
standby mode.
Network update
Press MENU on the remote control, then select
Options > Network update. Select On/off to enable
or disable the Network update function.
- When this function is on, the TV will automatically
update channels if your DTV service provider
updates his DTV network.
- When this function is off, you need to run the
channel search again to get new channels or
remove unavailable channels if your DTV service
provider adds or removes channels from their DTV
network.
Common interface
Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.
EN 11
Using more of your TV
button