CASO DESIGN Pro Menu 3500 Manual Del Usuario página 47

15.4.5 Timer
• Timer Function. Press the button Timer 2.
select the operating time in 1-minute intervals (up to max. 180 minutes).
• Once the time is up, an acoustic signal sounds and the device automatically goes
into standby mode.
Please note
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
15.4.6 Switching Off
• When you switch off the device via "On/Standby" and the temperature of the cooker
plate surface is lower than 50°C, the display shows „L". When the temperature of the
cooker plate surface is over 50 °C, it is displaying „H".
Please note
► Do not place any empty cookware on the ceramic field. Heating an empty pot or pan
activates the overheating protection and the device turns off.
► Do not operate the device if it is damaged in any way or does not function properly.
► The use of accessories and spare parts not recommended by the manufacturer may
lead to damage on the device and injuries.
16 Cleaning and Maintenance
This chapter provides you with important notices with regard to cleaning and maintaining
the device. Please observe the notices to prevent damages due to cleaning the device
incorrectly and to ensure trouble-free operation.
16.1 Safety information
Attention
Please observe the following safety notices, before you commence with cleaning the
device:
► The device must be cleaned and food residues must be removed at regular intervals. If
the device is not maintained in a clean condition, this will have a detrimental effect on
the service life of the device and can also result in a dangerous condition in the device
as well as in the growth of fungus and bacteria.
► Switch the device off prior to cleaning it and unplug the plug from the wall power outlet.
► The hob can be hot after use. There is a danger of burning! Wait until the appliance
has cooled down.
With the +/- keys, you can now
47