Connect With Pc - Nevir NVR-TAB8 S2 Manual De Usuario

Click to set the scene mode, Picture size, Picture quality, and
color effect.
Click to set white balance.
Click to select back or front camera.
9.2 DV If the cursor is at
mode.
Click to take picture.
Click to set the color effect or restore to default settings.
Click to select back or front camera.
10. Connect with external device

10.1. Connect with PC

Connect the device with the PC via the USB cable. The PC appears
two new disk symbols after connected successfully. One is the TF
card, and the other is the built-in flash.
position, the device is at DV
24