INNO K178 Instrucciones De Instalación

K178 Mounting Method by Vehicle Type
Manufacturer Model
CHEVROLET SILVERADO 1500
Maximum loading capacity is
55
kg ( 120 lbs) for this vehicle type.
Stay interior dimensions
ｍｍ
Front 48 8/5 inch / 1236
ｍｍ
Rear 48 3/4 inch / 1238
ｍｍ
Front
24 3/8 inch / 618
ｍｍ
Rear
24 3/8 inch / 619
Tape measure
Install Bases
Base number
402
Front base
Rear base 402
Mounting positions
● Position the stays so that bolts align at specified
mounting points.
Gap between front
and rear doors
inch 21 1/2 inch
6
ｍｍ ｍｍ
150 545
Rear mounting
Front mounting
position
position
Stay
Bolt
Front of vehicle
Type Year Maximum loading capacity
120
lbs
Double Cab
55
2014 -
( Load + Base rack
Crew Cab
+ Attachments )
Loosely attach hooks
Hook number
Front hook 142
Rear hook
142
■ Hook / base installation position
Front
Stay
Hook 142
There is gap.
Rear
Stay
Hook 142
There is gap.
● When knob is tightened, base moves slightly outward to the position
illustrated above.
41326011784A
EN
Bikes
2 Before using the Mounting hooks, carefully read the installation instructions as well as the installation
instructions for basic carrier systems, and follow all usage instructions. After reading the installation
instructions, keep it in a safe place along with the installation instructions for basic carrier systems. If you
are to give the mounting hooks to a third person, provide the installation instructions to ensure safe
installation and usage. If you have any questions regarding the installation instructions, contact our
customer service listed below.
Install hooks correctly at specified positions according to the installation instructions herein and the installation instructions for the
applicable carrier system. Installation positions of hooks depend on the vehicle type. If hooks are not installed at specified
positions, the carrier may fall and cause accidents. If the installation instructions appropriate for your vehicle type are not
available, contact our customer service listed below.
Select hooks matching your vehicle by referring to the Fit Guide available at stores or on our website : www.innoracks.com.
If inappropriate hooks are used, the carrier / attachment may fall and cause accidents.
Before driving the vehicle, rock the stays and bars in all directions to ensure that there is no looseness. Retighten any loose
knobs or bolts.
Do not use these hooks for attachments of non-specified types.
The carrier may fall and cause accidents.
Observe the specified loading conditions.
Base
Failure to observe the loading condition may cause the carrier to break or loosen and fall, resulting in accidents.
402
For INNO dedicated ski & snowboard carriers, read the carrier installation instructions to determine proper
mounting locations.
The SU Mounting hooks include the parts listed below. Verify that all of these parts are included in the carrier system you have
purchased. In the event any of these parts are missing, contact our customer service listed below.
NOTE
The specifications or external appearance of this product or any of the genuine spare parts may be changed for improve-
Base 402
ment without prior notification.
If you have any comments, questions or suggestions, contact our customer service listed below.
Car Mate USA shall not be held liable for any accidents or incidental losses arising from improper installations or usage.
Furthermore, Car Mate USA shall not be held liable for any accidents or incidental losses arising from installation or usage after
the customer has made any modifications to the system's original configuration or specifications.
If you can not find your vehicle on the following page(s), contact us for more information.
Car Mate USA, Inc.
383 Van Ness Ave., Suite 1603,
Torrance, CA 90501 U.S.A.
-EN
support@innoracks.com
www.innoracks.com
SU Fit Hooks
Installation Instructions
WARNING
No. Part
Check the numbers.
1 Hook
Base
2
Contact Information
0753-1781C -EN
K178
# of Part Qty
142 4
402 4
01 / 2014