Charging The Battery - Kasanova ONE000036NOC Manual De Instrucciones

MULTIFUNCTION RECORD PLAYER
10
1/Turntable
• Select Turntable Mode using the mode selection switch, it will enter into
the turntable status automatically.
• Remove the protective white needle cover by gently sliding it away from
the tone arm (Diagram 1).
• Unlock the tone arm from the arm lock by pushing it aside.
• Raise the tone arm using the arm raising lever or by carefully lifting it .
• Move the tone arm across to the outlet edge of the record and gently
lower it, the turntable will begin to spin and play automatically.
• Once the tone arm reaches the end of the record at the centre of the
turntable, the turntable will stop. Lift away the tone arm and place it back
into the armrest.
• Secure the tone arm once more by engaging the arm lock.
2/Wireless
• Select Wireless Mode using the mode selection switch , it will enter into
the Wireless status automatically.
• Then, please open the Wireless function on your mobile phone or others
Wireless device, it will begin to search for the Wireless device.
• This unit's Wireless name is "ONE000036NOC"; finally, your phone will
match with this unit successfully.
3/AUX
• Select Aux Mode using the mode selection switch, it will enter into the
AUX status automatically.
• Through the AUX cable, the sound can be played.
4/Earphone
In any state, insert earphones into the earphone hole.

5/Charging the Battery

• The Retro Audio Turntable is fitted with a 3.7V 1200mAh Li-ion battery. It
is recommended that the battery be charged fully before first use;this will
take approximately 6 hours.
• Charge only in a manned place.
• Do not leave the product connected when battery charging is complete.
• Connect the DC input end of the USB charging cable into the 5V 1A DC
charging port on the back of the retro Audio Turntable and the other end to