Descargar Imprimir esta página

Bahco BCL31SD1 Traducción De Las Instrucciones Originales página 8

Mini destornillador inalámbrico

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
1. Always switch off the machine before insertion or removal of the battery pack.
2. To remove the battery pack, push the button on the battery pack and pull the tool
unit from the battery pack in the direction.
3. To insert the battery pack, align the tool unit slides with the battery pack sliding
groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
4. Do not force the battery pack in sliding it into tool unit. If the battery pack does not
slide in easily, it is not being inserted correctly.
Charging the Battery Pack
1. Plug the fast charger into the power source.
2. Slide the battery pack into the charger as the arrow direction shown on the charger.
3. Push the battery pack into place and make sure the red light on the charger is
"ON". The battery pack is now starting the charging cycle.
4.    A fter finish the charging cycle, the light will turn into green. The battery pack is now 
ready for use.
5. Your new battery pack is not charged. You need to charge it before use.
6.    A lways use the specified charger to charge the battery. When the battery pack is 
inserted into the charger correctly, the red light will come on and charging will begin.
7.    W hen you charge a new battery pack or a battery pack which has not been used for a long period, 
it may not accept a full charge. This is a normal condition and does not indicate a problem. You can
recharge the battery pack fully after discharging it completely a couple of times.
8.    U nplug the charger from the power source after finish the charge.
9. Please remove the battery from the unplugged charger for storage.
The LED Light on the Charger
Power On (Green light flashes slowly)
Battery Low (Red light stays illuminated)
Battery charged 80% (Green light flashes rapidly)
Battery charged 100% (Green light stays illuminated)
Battery Pack temperature is too hot or too cold (Red light flashes slowly)
Battery Pack malfunction (Red and Green lights stay illuminated)
8

Publicidad

loading

Este manual también es adecuado para:

Bcl31sd1k1