Publicidad
Idiomas disponibles
Idiomas disponibles
SONAR manuale:Layout 1
19-07-2007
14:37
Pagina 45
(Nero/Bl
Each function of the disc lock is associated to a certain
number of blinking of the red LED (see column "Blink
number of the red LED associated to each function" on
Table A).
If it is not desired to change a function setting, it is
possible to pass to the next function by pressing the
button of Fig. 1 (for about 4 seconds) until a sound signal
("beep") is heard in confirmation of the operation .
Once all the functions have been set, keep the button of
Fig. 1 pressed for further 4 seconds in order to store all
the set values. Once the values are stored, the disc lock is
electronically activated.
Note: if the disc lock is opened before all the functions
are set, the settings will not be stored.
The settable functions are listed in Table A.
Pag. 45
Publicidad
