Audiolab DSP-4800 Manual De Usuario página 12

6. Crossover HPF Setting:
Parameter HPF, Highpass, range: 20Hz-20KHz,
Selectable fiter type: Link-Riley, Bessel, Butter-
worth. Selectable slope: 12dB, 18dB, 24dB,
48dB. Each channel has unattached highpass filter.
Example
1. Press OUT1 channel key for about 3 seconds till
the yellow light display, into Edit Status of OUT1.
2. Press "<BACK or "NEXT>", switch to HPF.
Display next:
3. Turn the first knob of "PARA" to adjust the val-
ue. (Turn the knob clockwise, the value increses,
turn the knob withershins, the value decreases.
Turn the second knob to select filter type, turn
the third knob to select slope.
7. Crossover LPF Setting:
Parameter LPF, Lowpass, range: 20Hz-20KHz,
Selectable fiter type: Link-Riley, Bessel, Butter-
worth. Selectable slope: 12dB, 18dB, 24dB,
48dB. Each channel has unattached lowpass filter.
Example
1. Press OUT1 channel key for about 3 seconds till
the yellow light display, into Edit Status of OUT1.
2. Press "<BACK or "NEXT>", switch to LPF.
Display next:
3. Turn the first knob of "PARA" to adjust the val-
ue. (Turn the knob clockwise, the value increses,
turn the knob withershins, the value decreases.
Turn the second knob to select filter type, turn
the third knob to select slope.
P. 12
DSP-4800
ENGLISH VERSION