Publicidad
Croma E 100 VarioJet
04332XX0
Croma C 100 3-Jet
04334XX0
Croma E 75 3-Jet
04336XX0
2
English
Technical Information
Max. flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
•
To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
•
This handshower must be used in combina-
tion with an approved backflow prevention
device.
•
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
2.0 GPM
Publicidad
