BOJ W-1285X Manual De Uso página 14

English
Note:
Shelves, door frame, handle and other accessories could be different according to different
models and configuration.
All photos in this manual are for reference. The appliance you buy might not be exactly the same
as shown here.
Please refer to the actual product.
Installing handle and reversing the door
1. Handle installation
Our wine cooler is delivered with the handle in a separate package.
The handle is delivered in a separated package with screws
together inside the carton.
 Reveal two small holes on the door frame from inner side by
pulling out a bit the door seal.
 Aim the handle to the holes and insert the screws from inside.
 Screw them up with screw-driver.
 Put back door seal to cover the screws.
2. Reversing the door
Our wine cooler is delivered with the door opening from left to right. To reverse the
opening direction:
W-0455X, W-0455B, W-0595X, W-0595B
Figure 1
• Open the door at 90 degrees and keep it steady.
• Unscrew the M5*16screws , dismantle the right
upper hinge , and remove the door.[Figure 1].
Figure 2
• Unscrew the M5*16screws ,dismantle the right lower
hinge .[Figure 2]
Figure 3
• Remove the lid .[Figure 3]
- 14 -