Makita HML01 Manual De Instrucciones página 5

3. Withdraw it from the tool while sliding the button
on the front of the cartridge.
4. Close the battery cover.
Battery converter (optional accessory)
BCV02 (optional accessory)
WARNING:
Before installing or removing the battery converter
•
BCV02, remove the lock key.
1
012383
Open the battery cover and click in the BCV02 into the
battery port on the mower.
Close the battery cover.
1. Battery converter (BCV02)
012384
To remove the BCV02, press on the hook of the BCV02
and withdraw it with both hands.
Power switch action
WARNING:
Before inserting the battery cartridge in the
•
tool, always check to see that the switch lever
actuates properly and returns to the original
position when released. Operating a tool with a
switch that does not actuate properly can lead to
loss of control and serious personal injury.
1. Battery
converter
(BCV02)
1
5
NOTE:
Trying to mow much grass at a time may not allow
•
the motor to start due to the overload. At this time,
change the mowing height to higher level to restart.
The mower does not start without pressing the
•
switch button even if the switch lever is squeezed.
This mower is equipped with the interlock switch and
handle switch. If you notice anything unusual with either
of these switches, stop operation immediately and have
them checked by your nearest Makita Authorized or
Factory Service Center.
1
012297
1. Insert the lock key into the interlock switch.
1
1. Switch button
2. Switch lever
012603
2. Depress the switch button.
3. Pull the switch lever toward you while depressing
the switch button.
4. Release the switch button as soon as the motor
starts running. The mower will continue to run until
you release the switch lever.
5. Release the switch lever to stop the motor.
6. When not in use, remove the lock key. Store the
lock key in a safe place out of reach of children.
1. Lock key
2