Vonyx CVB Serie Manual De Instrucciones página 3

UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS AND CONNECTIONS
1. Display
The display shows multiple forms of information, for example current
MODE, elapsed time, etc.
2. Button Cluster
Mode - Press to change mode.
Previous Track - Skip to previous track.
Play / Pause - Start/resume or pause play by pressing this button.
Next - Skip to next track.
Repeat - Press to select repeat single track or repeat full folder.
Mute/Stand-by - Press to mute the device. Hold to enter stand-by mode.
3. SD Card Slot
Insert an SD card in this slot.
4. USB Port
USB entry port.
5. Mic Output Level Control
Adjust the volume of the microphone channel.
6. Mic Echo Level Control
Adjust the echo level.
7. Treble Control
High tone control.
8. Bass
Low tone control.
9. Master Volume
Adjust the overall output level of the sound set.
10. XLR Microphone Input
XLR input for connecting a microphone.
11. Jack Microphone Input
6.3mm ¼" input jack for connecting a microphone.
12. Line Inputs
RCA input for connecting audio units with line level output
(e.g. mixer, CD player).
13. Line Outputs
RCA output for connecting another active speaker unit.
14. Power Switch
Switch to turn the device ON or OFF.
15. AC In And Fuse Holder
Socket for plugging in the supplied power cord.
CONNECTING WITH BT-DEVICE
1.
2.
3.
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10meter without any barrier.
Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions of that device for instructions.
Press the "MODE" button and activate BT-function.
Select "VONYX" on your BT-device and make the BT-connection
3