Conthidra CH-T2-18768-00 Instrucciones De Instalación Y Funcionamiento página 24

2.2 Retrofitting S3C with an additional communication interface
To our calculator further communication interfaces can be added later.
Open the calculator by pulling the clamping bracket at the upper housing´s leading edge up.
Plug the interface module on the right side of the PC board. If there are module cables you have to loosen the
needed number of cable glands and to glide them over the cables. Remove the blind plugs from the cable gland
openings and feed the cables into the calculator.
Protect the calculator against unauthorized opening using one of the numbered adhesive seals enclosed to the
modules (stick it upon the seal destroyed). The added bar code label can be used for the purpose of
documentation.
Page 24 of 50 Article no.: 1080621033 2022-02-04 Subject to technical change! Errors excepted.