STERWINS EGT2-25.3 Instrucciones Legales Y De Seguridad página 232

2. SAFETY INSTRUCTIONS
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of
operation, use low-vibration and low-noise operating modes as well as
wear personal protective equipment.
Take the following points into account to minimise the vibration and
noise exposure risks:
Only use the product as intended by its design and these instructions.
Ensure that the product is in good condition and well maintained.
Use correct attachments for the product and ensure they are in good
condition.
Keep tight grip on the handles/grip surface.
Maintain this product in accordance with these instructions and keep it
well lubricated (where appropriate).
Plan your work schedule to spread any high vibration tool use across a
longer period of time.
Emergency
Familiarise yourself with the use of this product by means of this
instruction manual. Memorise the safety directions and follow them to
the letter. This will help to prevent risks and hazards.
1.Always be alert when using this product, so that you can recognise
and handle risks early. Fast intervention can prevent serious injury and
damage to property.
2.Switch off and disconnect from the power supply if there are
malfunctions. Have the product checked by a qualified professional and
repaired, if necessary, before you operate it again.
EN
232