Hilti TE DRS 4-A Manual De Instrucciones página 18

3 Description
3.1 Overview of the product
3.2 Intended use
The TE DRS­4­A (01) dust removal module is an accessory for the Hilti TE 4­A22 (02) rotary hammer drill. It
collects a high percentage of the dust and it attaches quickly and easily to the rotary hammer drill. The dust
removal module has a built-in extractor fan. This fan is driven by its own motor. When the rotary hammer
drill is switched on the dust removal module draws its electric power from the rotary hammer drill's battery.
The dust removal module is not suitable for working on metal and wood.
Conditions: TE DRS-4-A T1
The TE DRS-4-A T1 satisfies the requirements of OSHA 1926.1153 Table 1.
3.3 Items supplied
Dust removal module, operating instructions.
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.group.
4 Technical data
Rated power input
Rated power input
Weight
Operating stroke
TE-C hammer drill bits used, ⌀
12 English
1
@
;
=
%
&
(
)
+
§
Suction head
Stroke limiter
Depth gauge
Dust container with filter
Dust container release
DRS release button
Guide (tool)
Electrical interface on the tool, with sliding
cover
DRS electrical interface
TE DRS-4­A
60 W
250 ℓ/min
1 kg
(2 lb)
≤ 96 mm
(≤ 3.8 in)
4 mm ... 16 mm
(3/16 in ... 5/8 in)
2102960
*2102960*
Spare parts,