s
Front Busbar Connection
Piezas frontales de conexión a barras
Plages de raccordement avant
Installation Instructions / Instructivo de Instalación
Hazardous Voltage.
Hazardous Voltage.
Will cause death or serious injury.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before
Turn off and lock out all power supplying this device before
working on this device.
working on this device.
Replace all covers before power supplying this device is
Replace all covers before power supplying this device is
turned on.
turned on.
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
NOTE - These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further information
be desired or should particular problems arise, which are not covered sufficiently
for the purchaser's purposes, the matter should be referred to the local Siemens
sales office. The contents of this instruction manual shall not become part of or
modify any prior or existing agreement, commitment or relationship. The sales
contract contains the entire obligation of Siemens. The warranty contained in
the contract between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered
trademarks of Siemens AG or Siemens Industry, Inc. The remaining trademarks
in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.
CATALOG # TSLP3M
THIS SHIELD MUST BE USED WITH CONNECTOR STRAP KITS CAT. #
SSBP AND SSBPH. REPLACE THIS SHIELD BEFORE ENERGIZING DEV ICE.
CATALOGO # TSLP3M
LA CUBIERTA DEBE SER USADA CON EL JUEGO DE BARRA DE
CONNEX ION CAT. # SSBP Y SSBPH. REEMPLACE LA CUBERTA ANTES
DE ENERGIZAR EL APARATO.
CATALOGO # TSLP3M
LA CACHE-BORNES DOIT ETRE EMPLOYEE AV EC KIT DE BARRE DE
CONNECTEUR CAT. # SSBP ET SSBPH. REMPLACEZ LA CACHE-BORNES
AV ANT D'ACTIV ER LE DISJONCTEUR.
8 0 6 8 6 5 A 0 4
Tensión peligrosa.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Puede causar la muerte o lesiones graves.
Desenergice totalmente antes de instalar o darle servicio.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
energizar el interruptor.
TERMINAL SHIELD
CUBREBORNES
CACHE-BORNES
Tension dangereuse.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Danger de mort ou risque de blessures graves.
Couper l'alimentation de l'appareil et barrer avant de
Couper l'alimentation de l'appareil et barrer avant de
travailler.
travailler.
Remplacez touts les couverts avant que
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
l'approvisionnement de pouvoir soit alimenté.
1 / 6
U.S. Cat. No.
Euro Order No.
3VL9800-4EF01
Item:
SSBP
3VL9800-4EG01
SSBPH
For Use With Frame NG, PG
Para Usar Con Caja Base NG, PG
1/4
3/4
SSBP / 3VL9800-4EF01
H
1/2 X 1.75 Hex
12X
1/2 Flat washer
1/2 Nut
GRADE 5
[ GRADO 5 ]
SSBPH / 3VL9800-4EG01
A
1/2 X 3.00 Hex
1/2 Flat washer
8X
1/2 Nut
B
1/2 X 2.50 Hex
16X
1/2 Flat washer
1/2 Nut
GRADE 5
[ GRADO 5 ]
I.L. No. 806865A04