Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Rockford Fosgate POWER T252-S
Resumen de contenidos para Rockford Fosgate POWER T252-S
- Página 2 AFETY CAUTION: Before installation, disconnect the battery T252-S Only negative (-) terminal to prevent damage Removing tabs for to the unit, fire and/or possible injury. some installations Use pliers to break off Break off plastic tab. mounting tab. PRACTICE SAFE SOUND™ snap! Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss.
- Página 3 EATURES PECIFICATIONS T252-S T2652-S T2T-S T2 Components Discreet Dual Clamp (DDC™) Nominal Diameter - inch (mm) 5.25 (133) 6.5 (165) 1.0 (25.4) Tweeter Mount Description Component System Component System Tweeter System Every aspect of the new Tweeter design has been completely re-engineered to allow for maximum Nominal Impedance (ohms) ease of installation and fitment.This optimized...
- Página 4 T252-S & T2652-S Component Wiring Tweeter On-Axis Tweeter Off-Axis Use illustration for proper connection. Be sure to maintain speaker polarity. Axis ON-OFF Switch Set to ON or OFF to match position of tweeter rela- tive to listener. Default OFF position satisfies most installations.
- Página 5 PECIFICATIONS 6.77" T252-S T2652-S 6.77" (172mm) T252-S T2652-S 6.02" (172mm) 4.37" 6.02" (153mm) 4.37" (111mm) (153mm) 6.18" (111mm) 3.84" 6.18" (157mm) 3.84" (98mm) 5.43" (157mm) Diameter (98mm) 5.43" (138mm) Diameter (138mm) Diameter Diameter 6.22" 6.97" 1.06" 1.18" 6.22" 6.97" 1.06" (177mm) (158mm) (27mm)
- Página 6 Français Español MISE EN GARDE : avant d'entamer l'installation, déconnectez la PRECAUCIÓN: Antes de la instalación, desconecte el terminal broche négative (-) de la batterie pour éviter tout risque de blessures, negativo de la batería (-) para prevenir daño a la unidad, incendio y/o d’incendie ou de dommages à...
- Página 7 Deutsch Italiano ATTENZIONE: Prima dell'installazione, scollegate il terminale VORSICHT: Entfernen Sie vor dem Einbau den negative Batteriepol, negativo (-) della batteria per evitare danni all'unità, pericoli d'incendio um Schäden am Gerät, Feuer bzw. mögliche Verletzungen zu vermeiden. e/o potenziali lesioni personali. PRAKTIZIEREN SIE SICHEREN SOUND Fortgesetzte Geräuschdruckpegel von über 100 dB können beim Menschen zu OSSERVATE LE REGOLE DEL “SUONO SENZA PERICOLI”...
- Página 8 Français Deutsch Câblage du filtre T2T-S T2T-S Crossover-Verkabelung Voir le branchement correct sur l'illustration. Zum ordnungsgemäßen Anschließen die Illustration benutzen. Veillez à maintenir la polarité du haut-parleur. Dabei die Lautsprecherpolarität beachten. Das Anschließen des positiven Drahts an 0 dB stimmt die Amplitude des Hochtöners auf Le branchement du fil positif à...
- Página 9 Remove Shaded Area From Adapter Plate for T252-S Shallow Mount Spacer Plate Adapter Plate Template 6.5" Hole Mounting Remove Shaded Areas Mounting for T252-S 5.25"...
- Página 10 Adapter Plate Template – 6"x9" Hole Mounting For 5"x7" Hole Mounting - Remove Dark Shaded Areas Mounting for T252-S 5.25" Remove For Tweeter Remove Shaded Areas to Mount T2652-S 6.5"...
- Página 11 T252-S Component System Tweeter 1.75" (44mm) Mounting Template T252 Midrange Mounting Holes 5.43" (138mm) T252 Midrange Hole Cutout 4.81" (122mm) Verify Scale Before Using 1.00" (25mm) Template 1.00" (25mm)
- Página 12 T2652-S Component System Tweeter 1.75" (44mm) Mounting Template T2652 Midrange Mounting Holes 6.18" (157mm) T2652 Midrange Hole Cutout 5.57" (141mm) Verify Scale Before Using 1.00" (25mm) Template 1.00" (25mm)