Publicidad
Idiomas disponibles
Idiomas disponibles
cleAninG And mAintenAnce
Over the course of time dust can accumulate
between the spokes in the fan housing, and on the
fan blades. Always begin by trying to remove the dust
with a brush and/or vacuum cleaner. If this does not
remove all the dust you can always dismantle the fan
and clean it.
1. Remove the plug from the wall socket.
2. L oosen the fan housing using a small crosshead
screwdriver.
3. R emove the front half of the filter housing.
4. H old the fan blades to stop them from turning,
and unscrew the spinner by turning clockwise in
the direction of the 'LOOSEN' arrow. Remove the
fan blades from the motor housing.
5. R emove the rear half of the fan housing by turning the locking ring at the centre of the housing
anticlockwise. Remove the ring and the housing from the motor housing.
6. C lean the dismantled parts and the base with a damp cloth. Dry thoroughly with a dry cloth.
7. Clean the motor housing with a dry cloth.
•
Verify that the appliance is not connected to the power supply before you clean it.
•
N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes)
to clean the appliance.
Reassemble the fan using the procedure given under by 'Assembling the fan'.
the enVironment
•
D ispose of packaging material, such as plastic and boxes, in the appropriate waste containers.
•
W hen this product reaches the end of its useful life do not dispose of it by putting it in a dustbin;
hand it in at a collection point for the reuse of electrical and electronic equipment. Please refer to the
symbols on the product, the user's instructions or the packaging.
•
T he materials can be re-used as indicated. Your help in the re-use, recycling or other means of
making use of old electrical equipment will make an important contribution to the protection of the
environment.
•
C ontact your municipality for the address of the appropriate collection point in your neighbourhood.
GuArAntee terms
The importer guarantees the appliance against defects caused by manufacturing and/or material faults for
60 months from the date of purchase, subject to the following conditions.
1. N o charges will be made for labour costs or materials during the warranty period. Any repairs carried out
during the warranty period do not extend the warranty period.
2. T he importer automatically becomes the owner of any faulty parts that he replaces or a faulty appliance
(in the event of replacement of the appliance).
3. All claims submitted under warranty must be accompanied by the original bill of sale.
4. C laims under warranty must be submitted to the dealer where the appliance was purchased or to the
importer.
5. The warranty is issued solely to the first purchaser and cannot be transferred.
6. The warranty does not cover damage caused by:
a. Accidents, incorrect use, wear and/or neglect.
b. F aulty installation and/or use in a manner contravening the prevailing legal, technical or safety
regulations.
c. Connection to a mains voltage other than the voltage specified on the type plate.
d. Unauthorized modifications.
e. Repairs carried out by third parties.
f. Careless transport, i.e. without suitable packaging materials or protection.
7. No claims may be made under this warranty for:
a. Losses incurred during transport.
b. The removal or changing of the appliance's serial number.
20
user's instructions
Publicidad
