DBDrums Multi Sample Pad Manual Del Usuario página 20

IMPORTANT NOTES!
Power supply
Do not connect this nPad to the same electrical outlet that is being used by an electrical appliance that

is controlled by an inverter (such as a refrigerator, washing machine, microwave oven or air conditioner),
or that contains a motor. Depending on the way in which the electrical appliance is used, power supply
noise may cause this nPad to malfunction or may produce audible noise. If it is not practical to use a
separate electrical outlet, connect a power supply noise filter between this nPad and the electrical outlet.
The AC adapter will begin to generate heat after long hours of consecutive use. This is normal, and is not

a cause for concern.
Before connecting this nPad to other devices, turn off the power to all of them. This will help prevent

malfunctions and/or damage to speakers or other devices.
Placement
Using the nPad near power amplifiers (or other equipment containing large power transformers) may

induce hum. To alleviate the problem, change the orientation of the nPad; or move it farther away from the
source of interference.
This device may interfere with radio and television reception. Do not use this device in the vicinity of such

receivers.
Noise may be produced if wireless communication devices, such as cell phones, are operated near the

nPad. Such noise could occur when receiving or initiating a call, or while conversing. If you experience such
problems, relocate such wireless devices farther away from the nPad, or switch them off.
Do not expose the nPad to direct sunlight, place it near devices that radiate heat, leave it inside an

enclosed vehicle, or expose it to extreme temperatures. Excessive heat can can damage, deform or
discolor the nPad.
When moved from one location to another where the temperature and/ or humidity is very different,

water droplets (condensation) may form inside the nPad. Damage or malfunction may result if you attempt
to use the nPad in this condition. Therefore, before using the nPad, you must allow it to stand for several
hours, until the condensation has completely evaporated.
Maintenance
For everyday cleaning, wipe the nPad with a soft, dry cloth or one that has been slightly dampened with

water. To remove stubborn dirt, use a cloth impregnated with a mild, non ‐ abrasive detergent. Afterwards,
be sure to wipe the nPad thoroughly with a soft dry cloth.
Never use benzene, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration

and/or deformation.
User Manual
2