Publicidad
Idiomas disponibles
Idiomas disponibles
Operating Buttons
A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
A: PROGRAM button
B: PROG. COPY buttons
C: CLEAR button
D: Setting buttons
E: HOLIDAY button
F: CANCEL button
G: TIMER OFF button
4
Names and Functions of Parts
Use to start setting programs and to enter program settings.
Use to copy programs to specific days in a schedule. (Refer to page 12)
The
button is not used.
Press to clear the settings of the currently displayed program.
•
The current program is not cleared unless the
after pressing the CLEAR button.
Use to make program settings and to set the present time.
Press to set groups for programmed operation.
Press to set today's day and days of programmed operation.
Press to set the present time and times used in programmed operation.
Use to start/stop indoor units via the timer.
Not used.
Use to set programmed operation trigger time.
•
Program settings are not entered unless the
the end of setting operations.
Press to set and cancel holidays during a scheduled week of operation.
Press to cancel the current program setting operation, copying operation or
holiday setting operation. When the CANCEL button is held down for 2
seconds, the current setting operation or copying operation is canceled and
the normal display returns.
Press to turn the timer OFF when timer operation will not be used for a long
period of time. When this button is held down for 2 seconds,
appears on the display. Programs cannot be run until the button is again held
down for 2 seconds.
•
Some of these buttons are disabled when SDI/DI is used with the
schedule timer in the conventional weekly timer mode. If any of the
disabled buttons is pressed,
information, contact your dealer.
E: HOLIDAY button
F: CANCEL button
G: TIMER OFF button
button is pressed
button is pressed at
appears on the display. For more
OI-916-4-EG
Publicidad
