Fein WSG 7-115 PT Instrucciones De Uso página 16

OBJ_BUCH-0000000277-001.book Page 16 Thursday, April 20, 2017 10:40 AM
en
16
Assembly instructions.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acci-
dental starting of the power tool.
Mounting the auxiliary handle
(figure 2).
Depending on the working manner, screw
the auxiliary handle right or left on the power
tool.
Mounting the wheel guard (figure 3).
Loosen the clamping screw.
Insert the wheel guard ensuring that the cams
of the opening engage in the grooves on the
power tool.
Turn the wheel guard to the requested work-
ing position, then clamp the wheel guard with
the clamping screw.
Mounting the cut-off wheel guard
For cut-off grinding opera-
WARNING
tions, always work with the
cut-off wheel guard mounted.
Mounting takes place as described under
"Mounting the wheel guard".
Fig. 2
Fig. 3
Clamping screw
Wheel guard
2.
Auxiliary handle
1.
2.
1.
4.
3.