Descargar Imprimir esta página

Vonyx PLAY 800 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
CONTROL ELEMENTS
1.
Microphone Input 1
6.3mm (1/4") jack for connecting
microphone.
2.
Microphone Input 2
6.3mm (1/4") jack for connecting
microphone.
3.
SD Input
Connect your SD/MMC devices to this slot to
play music with MP3-format.
4.
USB Input
Connect your USB devices to this slot to play
music with MP3-format.
5.
Previous
Press shortly Previous song or press above
3 seconds for fast backward.
6.
Next
Press shortly for the next song or press
above 3 seconds for fast forward.
7.
Menu
Press this button for selecting the functions
Bass / Treble / Microphone Volume or Echo
effect. Press the button for 3 second for
restoring factory settings.
8.
Volume control
Turn to adjust the master volume or adjust
the Bass / Treble / Microphone Volume and Echo effect after
pressing the Menu button.
9.
Mega Bass
Press this button for activating the mega bass function.
10. Play/Pause
For switching between play and pause.
11. Mode
Press this button shortly to skip to BT/LINE IN/USB/SD mode.
Press the button for 3 seconds to turn on/off voice prompt.
12. Line Input
RCA jack in- and output for connecting audio units with line level
output (e.g. mixer, CD player, tape recorder).
13. Power input
Connect the delivered power cable into this connector. Caution!
Voltage range AC 100-240Volt.
14. Power ON/OFF
CONNECTING WITH BT-DEVICE
1.
Activate the BT-function on your device (Mobile phone, tablet etc.) which you want to play the music. See the operating
instructions for that device.
Press the "MODE" button and activate BT-function of the soundbox.
2.
For a new connection press the "MENU" button for 2 seconds. The BT connection will be reset
3.
Press the "MODE" button and activate BT-function of soundbox again.
4.
Select "PLAY(PALY)800" on your BT-device and make the BT-connection
5.
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.
3

Publicidad

loading

Este manual también es adecuado para:

178.385