DeWalt D55250-CA Manual De Instrucciones página 9

WARNING: RISk Of INjURy fROm lIfTING
WHAt CAn HAPPen
• Serious injury can result
from attempting to lift too
heavy an object.
CAUTION: RISk fROm NOISE
WHAt CAn HAPPen
• Under some conditions and
duration of use, noise from
this product may contribute
to hearing loss.
SAvE THESE InSTruCTIonS
For FuTurE uSEFEATurES
FEATurES
unloADer VAlVe
When the maximum air tank pressure is obtained, the unloader
valve (H) will blow-off. This will cause the compressor to exhaust
the air to the atmosphere and not the tank.
HoW to PreVent It
• The compressor is too heavy
to be lifted by one person.
Obtain assistance from others
before lifting.
HoW to PreVent It
• Always wear certified safety
equipment: ANSI S1.6
(S3.19) hearing protection.
Manual lock: The manual lock allows you to
manually unload the compressor with air
pressure in the air tank. To operate the
manual lock:
Rotate the manual lock unloaderlever to the
open position to prevent air tank pressure
buildup. Rotate manual lock unloader lever to
the closed position after starting the engine to allow air tank pressure
to build. note: Air will not build in tank when manual lock unloader
lever in the open position.
sAfety VAlVe
This valve (I) is designed to prevent system failures
by relieving pressure from the system when the
compressed air reaches a predetermined level. The
valve is preset by the manufacturer and must not be
removed or modified in any way.
AIr IntAke fIlter
The filter (A) is designed to clean air entering the pump.
To ensure the pump continually receives a clean,
cool, and dry air supply the filter must always be clean
and the filter intake must be free from obstructions.
AIr tAnk DrAIn VAlVe
The drain valve (J) is used to remove moisture
from the air tank after the air compressor is shut
off. See Draining Air
Maintenance.
9
H
CLOSED
OPEN
A
J
tank under
H
I