Publicidad
Idiomas disponibles
Idiomas disponibles
8. APPLICATION
The workpiece must be clamped tightly before it is cut.
The saw teeth are very sharp. Do not touch during mounting and application
WARNING
NOTE: When plunging and sawing, use a slight pendulum motion, to allow sufficient chip
removal. The saw blade lasts longer if the wear is distributed evenly. To ensure
an even distribution, loosen the saw blade, rotate it and retighten firmly.
Cut/sand with a constant movement and light pressure. Heavy pressure does not increase the
cut/removal rate, the accessory merely wears faster.
Function
Sawing
Sanding
Scraping
OPERATION
Accessory
Bi-Metal Metal/Wood
End Cut Blade
HSS Saw Blade
Sanding Pad
Rigid Scraper Blade
Name
Wood,plastic, fiberglass, nails,
non-ferrous metals, thin sheet
metal, hardened fillers
Thin wood, plastic, fiberglass,
nonferrous metals, thin sheet
metal, hardened fillers, window
glazing
Wood, plastic, hardened fillers
Old paint, hardened adhesives,
caulk, carpet
Application
Page 11
Publicidad
