Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
09 Delay Start
10 START
Indicators
Control Lock indicator
Self Clean indicator
(applicable models only)
Rinse Refill indicator
Smart Control
32
English
DW9900R_DD68-00209A-04_EN.indd 32
Delay a cycle for up to 24 hours in one-hour increments. To
increase the delay start time, press or hold the Delay Start button.
The hour displayed indicates the time at which the wash will start.
- After setting the delay time, press the START button, and then
close the door to start the cycle.
- If you want to change the delay time once the dishwasher has
started, press the Cancel button and turn off the dishwasher.
Then, turn on the dishwasher again and select a new cycle with
a new delay setting.
To start a cycle, press the START button before closing the door.
Cancel & Drain: To cancel a currently running cycle and drain
the dishwasher, press and hold the START button for three (3)
seconds.
Once the dishwasher is reset, select a cycle and option, and then
press START to restart the dishwasher.
Lights up if Control Lock is activated, and blinks if
any button except for the POWER button is pressed.
Lights up if Self Clean is activated, and blinks for
5 seconds every 20-22 cycles. The cycle counter
disappears when the Self Clean cycle is complete, or
the dishwasher reaches the 23
Lights up if the dishwasher runs out of rinse aid.
Lights up if SmartThings is activated.
cycle.
rd
2021-04-05
8:11:16
Publicidad
