Installation (continued)
3
Installing the escutcheon
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
□
Ensure that the gasket (H) is pressed onto the
escutcheon (G) before the escutcheon (G) is
installed over the three holes in the sink.
□
From underneath sink, hand tighten the
mounting nuts (I). Do not overtighten.
NOTE: If the sink is uneven, use silicone under the
gasket (H).
I
4
□
□
G
H
5
Please contact (800) 880-8164 for further assistance.
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
Retract the hose (1) up through the faucet body,
until the hose tting is ush with the bottom of
the shank (2). Do not pull the hose tting past
the shank.
Insert the faucet assembly (A) through the hole
in the escutcheon (G).
NOTE: Do not feed the hose (1) back down through the
spout until step 6.
2
1
www.schonsimplymodern.com
A
G