Validation Of The Sd Removable Memory; Installation Examples; Technical Specifi Cations - Optimus UMX-MP3 Manual De Instrucciones

ENGLISH

8. Validation of the SD removable memory

Once the confi guration has been sent to the UMX-01/0, the memories of the UMX-MP3 cards that contain
emergency messages must be validated.
To do so, proceed as follows:
1. Insert the SD memory in the UMX-MP3.
2. On the keyboard of the UMX-01/0, press MENU/OK, select Confi gurations and press MENU/OK once
again.
3. Select MP3 Player, press MENU/OK followed by the card position where the UMX-MP3 is located. Press
MENU/OK.
4. Select Validate Memory and press MENU/OK.
5. Repeat these steps for each of the UMX-MP3 cards.
Once the memory has been validated, the system supervises the integrity of each of the emergency
messages so that it generates an alarm in the event that an error is detected.
Whenever any parameter of the emergency messages is modifi ed (name of the messages, number of
Eng
messages, duration...), it is necessary to validate the removable SD memory.

9. Installation examples

UMX-MP3, UMX-94R and UMX-ECT on the same
frame: Activation of MP3 messages from any of
the three cards.
120
CX-94
SMP-94RS
BX-94
24Vdc
RS-485 RS-485
OUT OUT
RS-485 RS-485
IN IN
120
RS-485 RS-485
OUT OUT
RS-485 RS-485
IN IN
10. Technical specifi cations
Power supply
Consumption
Supported Bitrates
Format
14
UMX-MP3
MP3 Message Playing Card
Figure13
UMX-01/0
UMX-01/0
Through the UMX-01/0
110 mA.
16 to 256 Kbps
1 slot in UMX-01/0 matrix
UMX-MP3 and UMX-94R / UMX-ECT on a different
chassis: Activation of MP3 messages is only possi-
ble from the UMX-MP3 card itself.
Figure 14
RS-485 RS-485
OUT OUT
RS-485 RS-485
IN IN
120
RS-485 RS-485
OUT OUT
RS-485 RS-485
IN IN
BX-94
24Vdc
CX-94
SMP-94RS
120
UMX-01/0
UMX-01/0
UMX-MP3 v1.2